Separated Anchor Drill Rig

Расколотая буровая установка

The separated anchor drilling rigs are mainly used in landslides and dangerous rock body reinforcement, especially suitable for side slope rocks anchoring. Besides, they have been widely applied in urban deep foundation pits support, and anti-floating anchors, foundation grouting holes, blastholes, high-pressure jet grouting piles and tunnel pipe shed support construction and other applications.

Drilling depth(m)
30-60

Диаметр отверстия (мм):
76-350

The split anchor drilling rigs are mainly used in landslides and dangerous rock body reinforcement, especially suitable for side slope rock anchoring. Besides, they have been widely applied in urban deep foundation pits support, anti-floating anchors, foundation grouting holes, blastholes, high-pressure jet grouting piles, and tunnel pipe shed support construction and other applications. The split anchor drilling rig is capable of conveniently operating in all directions through adjusting the rotary head to meet various construction requirements. Shorter feed beams can be customized to fit constructions in confined spaces. The diesel engine/electric motor it is equipped with has the function of independent operation.

Особенности отделенной якорной буровой установки

This separated anchor drilling rig has strong drilling capacity and high drilling efficiency.

The output shaft of the drill power head is equipped with an expansion mechanism to effectively protect the drilling tool. Power head and orifice plate turn direction, can directly drill the elevation hole, greatly increasing the drilling Angle range.

The front of the rig frame is equipped with the upper and lower adjustment columns and haff, which can adjust the height of the mast, and the hole position is fast and convenient during construction.

The hole plate of the drill is open and closed, which can be quickly moved and passed through the large diameter submersible hole impactor or following pipe drilling tool.

The rig structure is split type, good disassembly, convenient relocation and installation, and can be operated to complete porous construction; the operation staff has a good working environment and low labor intensity.

The drill hydraulic motor, pump, and fast joint adopt internationally famous brand products, and other main components select domestic famous products, which makes the whole machine perform stably, reliably, and long life. And it has high standardization and serialization, and good interchangeability.

The drilling rig is fully hydraulic-driven and can realize stepless speed regulation, simple operation, convenient maintenance, and fewer vulnerable parts.

The drilling rig can be applicable to a variety of drilling process methods, such as alloy rotary drilling, spiral drilling, submersible hole hammer drilling, heel pipe drilling and so on.

Технические данные:

МодельSADR-30SADR-50SADR-60SADR-70SADR-80SADR-100
3 pieces totalкг100011001300130015002000
Length*Width*Height(normal)мм2700*1150*14003300*1150*15003300*1150*15003300*1150*15003400*1150*15003500*1200*1600
Угол сверления°0~ -900~ -900~ -900~ -900~ -900~ -90
Номинальная глубина тренировким3050607080100
Диаметр тренировкиммΦ76-F140Φ76-F150Φ100-F180Φ100-F200Φ100-F250Φ100-F250
Вывод бухниСкорость выходного вращенияrpm21/11421/12021/15021/16021/18021/180
Максимальный выходной моментН.М.250028003200320040006000
Голова питанияКормлениемм180018001800180018001800
Тяговая силакН151530304045
Подъемная способностькН303045455565
Common Drill Pipe(casting) Dimensionsмм50*150076*150076*150076*150076*150050*1500
76*150089*150089*150089*150089*150076*1500
МодельОт ADR420ADR425SADR430SADR435S
Метод кормленияГидравлический цилиндр+цепьГидравлический цилиндр+цепьГидравлический цилиндр+цепьГидравлический цилиндр+цепь
Кормить общую длину5880mm6050mm7140mm6150mm
Расширение корма970mm970mm1220mm1220mm
Кормить длину путешествия3670mm3670mm3825mm3825mm
Feed Force Max.35kn35kn35kn35kn
Feed Speed Max.26m/s26m/s30m/s30m/s
Pullback Force Max.80kn80kn80kn80kn
Диапазон отверстийΦ90-178 ммΦ110-178 ммΦ110-350 ммΦ110-350 мм
Оптимальная глубина отверстия60m60m60m60m
Буриль трубаΦ76mm*3MΦ76mm*3MΦ76mm*3MΦ76mm*3M
Молоток/5»/6»/5»/6»/6»/8»/6»/8»
Крутящий момент вращения5000n.m5600n.m8000n.m8000n.m
Скорость вращенияL60/H140RPML60/H160RPML70/H140RPML70/H140RPM
Пропускная способность топливного бака70L105L105L105L
Tramming Speed Max.2.5m/h2.5m/h3km/h3km/h
Gradeability Max.25°25°25°25°
Наземный просвет300mm300mm300mm300mm
Угол колебаний трассы± 10 °± 10 °± 10 °± 10 °
Traction Force Max.54kn54kn54kn54kn
Weight(w/o Options)5510kg7080kg6870kg8030kg
Dimensions(L*W*H)6500*2280*2400mm6900*2270*2210mm7300*2280*3000mm7300*2370*2700mm