Rig pengeboran rekayasa crawler hidrolik sepenuhnya
The drilling rig is mainly suitable for the construction of large tonnage prestressed anchorage hole or drainage hole in hydropower station engineering, railway, highway slope, urban deep foundation pit support and foundation reinforcement hole, and the construction of ground source heat pump hole; also suitable for the prevention of landslide and rock collapse; and meets the investigation and construction of tunnel pipe shed supporting hole, grouting reinforcement hole, small foundation pile hole and hydrological well.
The crawler engineering drilling rig is a crawler chassis loading capacity, fully hydraulic drive, and suitable for multiangle drilling equipment for the following process methods:
No circulating fluid spiral drilling (dry drill)
Air submersible hammer (pneumatic impactor) drilling
Pengeboran siklus positif lumpur
Palu lubang submersible udara dengan pengeboran pipa
Pengeboran tabung ganda aksi tunggal
Kanula dan pipa bor untuk mengebor secara bersamaan
The drilling rig is suitable for a variety of drilling methods, which have great adaptability to various strata and complex working conditions. It can effectively solve the problem of difficulties in drilling in loose covered strata, gravel strata, and bedrock broken strata, and has a very wide range of uses.
Data teknis:
| Model | EDR-150Q | EDR-180G | ||
| Bor berat rig (pemasangan crawler) | kg | 8000 | 10000 | |
| Panjang*lebar*tinggi (normal) | mm | 5600*2100*2500 | 6350*2200*2930 | |
| Sudut bor | ° | 0~ -90 | 0~ -90 | |
| Kedalaman bor nominal | M | 150 | 200 | |
| Diameter bor | mm | Φ100-F350 | Φ100-F350 | |
| Kepala Mengemudi (HB-45/50A) | Kecepatan rotasi output | RPM | 21/97 70/190 | 40/80 130/180 |
| Torsi output maks | N.M. | 7500 | 9000 | |
| Stroke power head | Makanan | mm | 3500 | 350 |
| Kekuatan dorong | kn | 40 | 45 | |
| Kapasitas pengangkatan | kn | 55 | 65 | |
| Jenis drive engine | Model | Cummins | Cummins | |
| Kekuatan | 4BT-C100/74KW | 6BT-C180/132KW | ||
| Kecepatan putar (maks.) | RPM | 2200 | 2200 | |
| Daya listrik opsional | 45kw+22kw | 55kw+37kw | ||
| Lacak basis sasis | Lebar pedrail | mm | 400 | 400 |
| Kecepatan berjalan | km/h | 2 | 2 | |
| Kemampuan memanjat | ° | ≤20 | ≤20 | |
